Inkjecta Nano Bumpers are made for our Elite and Ultralite machines.
Allowing for a soft and grippy surface to make your Inkjecta more secure when sitting it on your bay, as well as letting you customise the look of your machine.

Technical Features

• Material: Rubber
• Sold in matching pairs

The Round Flight Nano caps come standard on our Elite and Ultralite tattoomachines.
Designed to keep the moving parts of the machine covered and wrappable while also allowing you to personalise your machine's asthetic.

Features:

• made from durable plastic
• fits all Ultralite, Lite and Elite Nano Machines

Square Caps not only look good but they are also to protect you from the moving parts on the Machine.  
They come as standard on the Lite Nano Machines but also fit Ultralite and Elite Nano Machines as well.

Features:

• made from durable plastic
• fits all Ultralite, Lite and Elite Nano Machines

The Inkjecta Flite X1 Rubbaz provide a customised safety barrier between your machine and the every day contaminants of tattooing. These covers are specifically designed for the X1 and are autoclavable. Their life expectency is between 3 and 10 cycles depending on usage and settings.
Or, just dispose of them after each tattoo session for ease of use.

Features:

• Comes in boxes of 10 Rubbaz
• made from durable silicone
• fit perfect on the X1 Tattoo Machine

*Multicoloured Rubaz patterns will vary from piece to piece.

Cable for use with RCA compatible tattoo machines including but not limited to our Flite Pen, Nano Elite and Ultralite tattoo machines.
RCA connectors used in the cable are tested to ensure high quality and function.

Technical features:

• lenght 2.5m/8ft
• tested RCA connectors

Inkjecta Grub Screws are for use in all Inkjecta Nano Cams/Eccentrics, as well as X1 Worm Drives.
Keep a few replacements on hand in case one gets away from you.

Technical Features

• Material: Stainless Steel
• Sold in packs of 3

Inkjecta Batteries for use in our Flite X1 Tattoo Machines. These Batteries are PCM protected and tested for your safety. PCM testing protects the battery from over charging and discharging to you and your material.
The 2040mAh capacity of the 18500, and 900mAH of the 18350 give you the freedom you need to work efficiently based on weight, balance and length of session.

Technical features:

• sold in packs of two
• PCM protected
• 18500/2040mAh
• 18350/900mAh

*to use the 18350 sized batteries you require a brass spacer that is supplied with every X1 machine.

Inox MX6 Lubricant 15g tube Premium food grade grease.
For use in your grip tube/tip of push bar to reduce noise and friction.

Technical features:

• food grade grease
• less friction, extends material life, lowers operating temperature and leads to noise reduction
• high temperature resistance -30°C - Dropping point >300°C

*NOT FOR USE ON Nano CAM OR MOTOR. ANY LUBRICANT OR LIQUID ON THESE COMPONENTS WILL VOID ANY WARRANTY*

The Efest LUSH Q2 Charger is a 2 per charger with automatic 2.0A fast charging with one battery and 1.0A fast charging with two batteries.
Super simple design with no buttons or screens, a simple LED display shows the state of your battery while charging and when charged.
Built in reverse polarity, short circuit, overcharge protection and many more safety features.

Available with AU, USA and EU charging cables.

What's Included:

1 x Efest Lush Q2 Battery Charger
1 x AC Adapter

Specs & Features:

• Fast Charge: Select Between 1.0A and 2.0A
• Auto-Stop When fully charged
• Auto Recharge: Voltage Lower than 4.05V
• Over Discharge Protection
• Over Voltage Protection
• Short-Circuit Protection
• Reverse Polarity Protection
• Independent Battery Slot Monitors
• Piano Wire Springs
• Low Resistance Steel Cathodes
• Hard Chromium Plating
• Precise Charging Voltage
• 15,000+ Times Spring Testing Quality Warranty
• Compatible with: 10400, 14430, 14500, 14650, 16340, 16500, 17335, 17650, 17670, 18500, 18650, 20700, 22650, 26500 and 26650

The Efest LUC V8 Charger is our choice for effectively and efficiently charging you Flite X1 batteries.
With 8 slots, fast charging for up to 8 batteries at once, and reverse polarity, short vcircuit and overcharge protection for safety.
Compatible with various diferent 3.6V/3.7V lithium batteries commonly used in vapes, tools and flashlights.

Available with AU, USA and EU charging cables.

Package Contents:

Efest LUC V8 Battery Charger
DC 12V 4A Adapter
Warranty Card
User Manual

Features and Specs:

• Compatible with: 10440, 14500, 14650, 16340, 16650, 17650, 17670, 18350, 18490, 18500, 18650, 20700, 21700, 25500, 26650
• Double LCD Screens
• Eight Slot Battery Charger
• Double USB Output Ports
• Supports Fast Charge: 8 Batteries x 1.0A
• Supports Fast Charge: 4 Batteries x 2.0A
• DC Input Power: DC 12V 4A
• 4 x 2.0A CC Current: 2000mA (+/-10%)
• 8 x 1.0A CC Current: 1000mA (+/-10%)
• 8 x 0.5A CC Current: 250mA (+/-10%)
• 8 x 0.25A CC Current: 250mA (+/-10%)
• Li-ion Auto Cut-Off Voltage: 4.20 (+/-0.05V)
• CV Cut-Off Current: <10% Max
• Standby Current: <100mA
• Activation Current: <100mA
• Auto Recharge Voltage: 4.10 (+/-0.10V)
• Operation Temperature: 0C ~ 40C
• Storage Temperature: -40C ~ +70C